Thanks to its high-performance pump unit, INDY I can deliver a flow rate from 489 to 1,446 l/min, depending on the inlet pressure.
It is equipped with a 7.5 kW three-phase electric motor and comes with an external control panel complete with automatic condensate drain, automatic shutdown and automatic restart for continuous and safe operation.
All in a compact design that's easy to integrate into existing systems - the perfect amplifier when high volumes at medium pressure are needed, without compromising on simplicity.
Technical Specification
Gas type
Air - Nitrogen
Suction pressure
Min. 2 bar - Max. 8 bar
Pressure classification
40 bar
Drift pressure
40 bar
Permissible temperature range
-10 °C ÷ +40 °C
Maximum authorised gradient
15°
Design
Basic model
Operating voltage, standard
400 V, 50 Hz
Other operating voltages
For three-phase motors at 60 Hz, power (kW/hp) increases by 20 %.
230 V, 50 Hz / 440 V, 60 Hz / 230 V, 60 Hz
Compressor
Flow rate for pump group
7.5 kW
From 489 l/min to 1 466 l/min
From 29.4 m³/h to 88 m³/h
From 17.3 CFM to 51.8 CFM
Cooling flow (air)
7.5 kW
1 400 m³/h
Weight
Standard model. Dimensions and weight may vary depending on accessories.
7.5 kW
105 kg
231.5 lb
Dimensions
(W x D x H)
103 x 44.7 x 61.7 cm
40.5 x 17.6 x 24.3 inches
Engine
Effect
7.5 kW
7.5 kW
10 hp
Engine type
7.5 kW
Three-phase electric
Operating voltage/frequency
Different voltages and frequencies available on request.
7.5 kW
400 V, 50 Hz
Marking current
7.5 kW
15 A
Rotational speed (RPM)
7.5 kW
2 870 rpm
Protection class
IP55
